On-line: гостей 0. Всего: 0 [подробнее..]
Правила: заголовок темы должен кратко и понятно отражать ее суть, нельзя писать латиницей или заглавными буквами. Сообщение, ник, аватар не должны выделяться своими размерами или стилем написания от остальных, быть читабельными, написаны литературно и достаточно грамотно.


Сообщение: 2
Зарегистрирован: 19.06.18
Рейтинг: 0
ссылка на сообщение  Отправлено: 19.06.18 15:51. Заголовок: Новая версия MC12

По сообщению производителя вышла новая версия MC12.
Как и обычно, есть демоверсия с ограничением до 50 компонентов.
Судя по обещаниям, версия 12 это серьезные изменения в части ускорения автоматизации и удобства работы.
Установил, попробовал. Отторжения не возникло, почти все как и в MC11.

New Micro-Cap 12 Features


Smoke / Stress Analysis
An entirely new analysis tool called Smoke was introduced to assess how close circuits are to violating maximum operating limits.

Monte Carlo
Monte Carlo routines were improved in several ways:
• Histogram: 2D and 3D option was added.
• The ability to view the tolerances used for individual cases was added.
• The ability to create a circuit for any case was added.
• Asymmetric tolerances: (+80%,-20%): Asymmetric initial tolerances are now supported.

• AC Probe: The Analysis Limits dialog lets you control how the AC values are displayed on the schematic (e.g. Real, Imaginary, Magnitude. etc.).
• In Cursor mode the schematic shows the values at the cursor position.

Enhanced Worst Case
• Improved Editor: The editor used for setting the various bias tolerances. has been significantly improved. Undo and redo added to the editor.
• Bias Templates: You can now use templates for common types such as Drift, Temperature, Voltage Stress, Radiation, Etc.
• Asymmetric tolerance (+80%,-20%): Asymmetric initial tolerances are now supported.

Parameter passing
Text can be passed as a parameter to subcircuits.

Temperature variation
Temperature can be a function of time or other circuit variables.

Import and export
Importing and exporting of waveforms and curves is now made easier through direct export of analysis plots to Excel, text file, or the clipboard. PWL source waveforms can be imported from Excel or text file.

A set of routines was added that provides optional user-controlled smoothing at the corners of Pulse and PWL Voltage and Current sources and for LIMIT and TABLE functions in NFV, NFI, NTVOF, and PSPICE dependent sources. The purpose of smoothing is to enhance overall convergence.

State Variables editor
A .Nodeset command was added that creates a .Nodeset using current state variable values. This command works similarly to the .IC command.

Temperature variation
Temperature can now be a function of time or other circuit variable.

• New Random and Step All modes for searching for local optima.
• Optional log tracks progress through the optimization steps.

Save start
The Run Options / Save command now starts saving at Output Start Time for Transient, reducing file sizes and improving retrieve speed.

.Define comments
Comments may now be added to .define statements. Comments are prefaced with a semi-colon (;) and placed at the end of the .define statement. For example,

New Opamp variables

VP VM IP IM IOUT IEE ICC. For example, IOUT(O1) measures the output current of opamp O1. VM(O7) measures the voltage on the minus input pin of opamp O7. IEE(O2) measures the current into the negative power supply of opamp O2.

Root refers to the folder containing the Micro-Cap executable folder and may be used as a short reference to it in file path names.
Root refers to the folder containing the Micro-Cap executable folder and may be used as a short reference to it in file path names.

Undo for Analysis Limits
The Analysis Limits dialog box for every analysis type now has a full undo / redo. If you delete a row or add one it is undoable, as are any changes in the dialog box.

Smart paste

The data for USR, PLA, and STM stored in a file page, is now pasted along with the component when it is pasted into another circuit.

Numeric output

The process of creating numeric output was sped up by 25%.

PHASE2 function

A PHASE2 function was added that measures the dynamic phase relationship between two sinusoidal waveforms.

Peak function
A peak function was added. Identical to the MAXR function.

Schematic Editor
Spreadsheets can now be placed in the schematic. In addition to following the usual spreadsheet format and usage, they have access to simulation variables.
Enhanced Region Enable
Ways to enable components or entire regions now includes Expression Value, Check Box, and Buttons. These are particularly useful in quickly comparing the effect on analysis plots of different circuit options.

Pinned files
Frequently used file names can now be pinned to the Recent Files list and abbreviated path names simplify the list.

Localize command improvements
The Localize command now embeds all companion files (*.usr. etc). Localizing a file is vital to ensuring the circuit works as expected when you send it to a colleague. It avoids the problem of missing or different versions of models, subcircuits and other important circuit information.

PWL import
Added ability to import a waveform to a PWL Voltage Source from an Excel file or from a CSV file.

Fine placement

Selected schematic objects (components, graphics, lines, text, etc.) or regions can now be moved with cursor keys for fine control of placement.

Additional graphics objects

Closed and open polygons, triangles, and stars were added. Objects now have an optional pattern, gradient, or picture fill.

Block Editor

New block shape type for creating arbitrary package shapes was added.

Stop Sign:

A stop sign marks the component at which an error occurred.

Large toolbar icons

Large toolbar icons were added to offer easier viewing on very high resolution monitors.

Build command

The commands .RELTOL and .TR were added to the Build command function.

Rename command

This command now has options to update disabled parts, search on current page only, and have a starting value.


Revised and improved the Bill of Materials report to include drag and drop formatting of columns.

Pan mode

Added a Pan mode to circuit schematics, 3D plots, and analysis plots.This lets you drag the view with the left mouse. CTRL + right mouse drag still pans as before.

Info page

This page, which shows the detail about where each model or circuit file used in the simulation was found, can now use generic references to library or data folders. This simplifies the display when lengthy path names are used.

Page tabs

Added a down arrow for schematic page selection.

Additional formats

Added current and power numeric formats to the Format tab of the Schematic Properties dialog box (F10).


The file names of models that use .Macro statements now show in the Attribute dialog box. Previously, models like SCRs and thyristors that use .macro statements did not appear in a drop down list.


Three tabs were added to the calculator.

• Combinations lets you see how to form resistor, capacitor, or inductor values from standard values.

• Local .Defines creates .define variables that are local to the calculator.

• Expand Defines lets you see how .defined variables are constituted. This is useful when debugging complex expressions.


Nom.lib is now accessible from the Options menu.

Bold non-default preferences

On the Preferences dialog box, non-default values are now shown in bold.

Model Program tabs

Added tabs to select different graphs.

Спасибо: 0 
ПрофильЦитата Ответить
Ответов - 22 , стр: 1 2 All [только новые]

Сообщение: 181
Зарегистрирован: 20.10.13
Откуда: 777RUS
Рейтинг: 3
ссылка на сообщение  Отправлено: 09.04.20 17:21. Заголовок: https://files.fm/u/u..

11 и 12 версии оригинальные

Спасибо: 0 
ПрофильЦитата Ответить

Сообщение: 182
Зарегистрирован: 20.10.13
Откуда: 777RUS
Рейтинг: 3
ссылка на сообщение  Отправлено: 09.04.20 17:22. Заголовок: Скачать

11 и 12 версии

Спасибо: 0 
ПрофильЦитата Ответить
Ответов - 22 , стр: 1 2 All [только новые]
1 2 3 4 5 6 7 8 9
большой шрифт малый шрифт надстрочный подстрочный заголовок большой заголовок видео с youtube.com картинка из интернета картинка с компьютера ссылка файл с компьютера русская клавиатура транслитератор  цитата  кавычки моноширинный шрифт моноширинный шрифт горизонтальная линия отступ точка LI бегущая строка оффтопик свернутый текст

показывать это сообщение только модераторам
не делать ссылки активными
Имя, пароль:      зарегистрироваться    
Тему читают:
- участник сейчас на форуме
- участник вне форума
Все даты в формате GMT  3 час. Хитов сегодня: 359
Права: смайлы да, картинки да, шрифты да, голосования нет
аватары да, автозамена ссылок вкл, премодерация откл, правка нет