Правила: заголовок темы должен кратко и понятно отражать ее суть, нельзя писать латиницей или заглавными буквами. Сообщение, ник, аватар не должны выделяться своими размерами или стилем написания от остальных, быть читабельными, написаны литературно и достаточно грамотно.
Отправлено: 19.06.18 15:51. Заголовок: Новая версия MC12
По сообщению производителя вышла новая версия MC12. Как и обычно, есть демоверсия с ограничением до 50 компонентов. Судя по обещаниям, версия 12 это серьезные изменения в части ускорения автоматизации и удобства работы. Установил, попробовал. Отторжения не возникло, почти все как и в MC11.
New Micro-Cap 12 Features
Analysis
Smoke / Stress Analysis An entirely new analysis tool called Smoke was introduced to assess how close circuits are to violating maximum operating limits.
Monte Carlo Monte Carlo routines were improved in several ways: • Histogram: 2D and 3D option was added. • The ability to view the tolerances used for individual cases was added. • The ability to create a circuit for any case was added. • Asymmetric tolerances: (+80%,-20%): Asymmetric initial tolerances are now supported.
Probe • AC Probe: The Analysis Limits dialog lets you control how the AC values are displayed on the schematic (e.g. Real, Imaginary, Magnitude. etc.). • In Cursor mode the schematic shows the values at the cursor position.
Enhanced Worst Case • Improved Editor: The editor used for setting the various bias tolerances. has been significantly improved. Undo and redo added to the editor. • Bias Templates: You can now use templates for common types such as Drift, Temperature, Voltage Stress, Radiation, Etc. • Asymmetric tolerance (+80%,-20%): Asymmetric initial tolerances are now supported.
Parameter passing Text can be passed as a parameter to subcircuits.
Temperature variation Temperature can be a function of time or other circuit variables.
Import and export Importing and exporting of waveforms and curves is now made easier through direct export of analysis plots to Excel, text file, or the clipboard. PWL source waveforms can be imported from Excel or text file.
Smoothing A set of routines was added that provides optional user-controlled smoothing at the corners of Pulse and PWL Voltage and Current sources and for LIMIT and TABLE functions in NFV, NFI, NTVOF, and PSPICE dependent sources. The purpose of smoothing is to enhance overall convergence.
State Variables editor A .Nodeset command was added that creates a .Nodeset using current state variable values. This command works similarly to the .IC command.
Temperature variation Temperature can now be a function of time or other circuit variable.
Optimizer • New Random and Step All modes for searching for local optima. • Optional log tracks progress through the optimization steps.
Save start The Run Options / Save command now starts saving at Output Start Time for Transient, reducing file sizes and improving retrieve speed.
.Define comments Comments may now be added to .define statements. Comments are prefaced with a semi-colon (;) and placed at the end of the .define statement. For example, .DEFINE AVG1 AVG(V(1)) ; AVERAGE VALUE OF NODE 1 VOLTAGE.
New Opamp variables
VP VM IP IM IOUT IEE ICC. For example, IOUT(O1) measures the output current of opamp O1. VM(O7) measures the voltage on the minus input pin of opamp O7. IEE(O2) measures the current into the negative power supply of opamp O2.
Root Root refers to the folder containing the Micro-Cap executable folder and may be used as a short reference to it in file path names. Root Root refers to the folder containing the Micro-Cap executable folder and may be used as a short reference to it in file path names.
Undo for Analysis Limits The Analysis Limits dialog box for every analysis type now has a full undo / redo. If you delete a row or add one it is undoable, as are any changes in the dialog box.
Smart paste
The data for USR, PLA, and STM stored in a file page, is now pasted along with the component when it is pasted into another circuit.
Numeric output
The process of creating numeric output was sped up by 25%.
PHASE2 function
A PHASE2 function was added that measures the dynamic phase relationship between two sinusoidal waveforms.
Peak function A peak function was added. Identical to the MAXR function.
Schematic Editor Spreadsheets Spreadsheets can now be placed in the schematic. In addition to following the usual spreadsheet format and usage, they have access to simulation variables. Enhanced Region Enable Ways to enable components or entire regions now includes Expression Value, Check Box, and Buttons. These are particularly useful in quickly comparing the effect on analysis plots of different circuit options.
Pinned files Frequently used file names can now be pinned to the Recent Files list and abbreviated path names simplify the list.
Localize command improvements The Localize command now embeds all companion files (*.usr. etc). Localizing a file is vital to ensuring the circuit works as expected when you send it to a colleague. It avoids the problem of missing or different versions of models, subcircuits and other important circuit information.
PWL import Added ability to import a waveform to a PWL Voltage Source from an Excel file or from a CSV file.
Fine placement
Selected schematic objects (components, graphics, lines, text, etc.) or regions can now be moved with cursor keys for fine control of placement.
Additional graphics objects
Closed and open polygons, triangles, and stars were added. Objects now have an optional pattern, gradient, or picture fill.
Block Editor
New block shape type for creating arbitrary package shapes was added.
Stop Sign:
A stop sign marks the component at which an error occurred.
Large toolbar icons
Large toolbar icons were added to offer easier viewing on very high resolution monitors.
Build command
The commands .RELTOL and .TR were added to the Build command function.
Rename command
This command now has options to update disabled parts, search on current page only, and have a starting value.
BOM
Revised and improved the Bill of Materials report to include drag and drop formatting of columns.
Pan mode
Added a Pan mode to circuit schematics, 3D plots, and analysis plots.This lets you drag the view with the left mouse. CTRL + right mouse drag still pans as before.
Info page
This page, which shows the detail about where each model or circuit file used in the simulation was found, can now use generic references to library or data folders. This simplifies the display when lengthy path names are used.
Page tabs
Added a down arrow for schematic page selection.
Additional formats
Added current and power numeric formats to the Format tab of the Schematic Properties dialog box (F10).
.Macro
The file names of models that use .Macro statements now show in the Attribute dialog box. Previously, models like SCRs and thyristors that use .macro statements did not appear in a drop down list.
Calculator
Three tabs were added to the calculator.
• Combinations lets you see how to form resistor, capacitor, or inductor values from standard values.
• Local .Defines creates .define variables that are local to the calculator.
• Expand Defines lets you see how .defined variables are constituted. This is useful when debugging complex expressions.
Nom.lib
Nom.lib is now accessible from the Options menu.
Bold non-default preferences
On the Preferences dialog box, non-default values are now shown in bold.
Отправлено: 14.10.18 23:33. Заголовок: Вышла обновленная 12..
Вышла обновленная 12.0.1.0 демо версия. Значительно добавились библиотеки ( для Pro версии) и появились шаблоны (Template) в каталоге. Основных исполняемых файлов полной версии пока не видел.
Отправлено: 17.03.19 21:11. Заголовок: Где основные исполня..
Где основные полные исполняемые файлы взять? Тогда посмотрим. Версия похожа по структуре на 11. Нужны exe и dll. В них нет данных о лицензии и пользователе. Они универсальные. Остальное можно попробовать через upd.. Весь дистрибутив программы , кроме ключа , вообще никак до сего времени не был привязан к лицензии пользователя. За это отвечает драйвер ключа и сам ключ, при чтении которого и выводится номер лицензии. Т.е. без реального ключа весь дистрибутив универсален, как и большинство программ и для работы он всегда будет сканировать лицензию, не найдя которой просто закроется программа. Это легко проверяется, достаточно отключить ключ ( у кого он есть) и запустить программу без него.
МС стал фри-варный или это триал? При установке про лицензию было написано:
Micro-Cap License Agreement and Disclaimer
Micro-Cap is Spectrum Software's circuit simulation software. As of 7/4/2019, it is available free to the entire engineering community.
This software is copyrighted. You are granted a non-exclusive, non-transferable, non-sublicenseable, royalty-free right to perform general circuit simulation.
While we have made every effort to ensure that Micro-Cap operates in the manner described, we do not guarantee operation to be error free. Upgrades, modifications, or repairs to this program will be strictly at the discretion of Spectrum Software.
The software and related documentation are provided "AS IS" and without warranty of any kind. Spectrum Software expressly disclaims all other warranties, express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Under no circumstances will Spectrum Software be liable for damages, either direct or consequential, arising from the use of this product or from the inability to use this product, even if we have been informed in advance of the possibility of such damages.
Redistribution of this software is permitted as long as it is distributed in its entirety, with all documentation, sample circuit files, and models without modification or additions.
Отправлено: 21.07.19 20:38. Заголовок: Я еще после установк..
Я еще после установки 12 версии добавил туда библиотеки и элементы от своей сборки 11.0.3.3 , в которую включены дополнительные библиотеки и примеры ( в том числе примеры на русском и блоки от версии AML). Пока все обновленные версии 10,11,12 работают без ограничений. Работаю на 64 разрядной версии (11,12). Разницы между работой вылеченной 11 версией и 11.2.0.0. не обнаружил ( в том числе и по "багам") Как была ошибка отображения пилообразного сигнала в источнике напряжения, так и осталась- ошибка задания минимального PW ( там по умолчанию - 0, а нужно хотя бы 1 Fs). Началось примерно с версии 11.0.1.5
Сообщение: 1877
Зарегистрирован: 02.05.07
Откуда: Россия, Смоленск
Рейтинг:
6
Отправлено: 21.07.19 21:47. Заголовок: В 12-ю версию добави..
В 12-ю версию добавили возможность устанавливать большой размер иконок (пиктограмм). Для меня важно - я стандартные очень плохо вижу (монитор 2560х1440). Но оказалось, корректно эта функция работает только для стандартного размера шрифтов Windows. Если установить размер 125% - полная хрень на экране.
Отправлено: 20.08.19 13:04. Заголовок: На сайте разработчик..
На сайте разработчика появились комментарии. Худшие подозрения подтвердились
цитата:
News:
Effective 7/4/2019, Spectrum Software is closed. Micro-Cap is now free.
Technical support will be available for at least 90 days via email at Support.
You can download the latest versions of Micro-Cap here: Download You can choose either the executable program or the entire installation CD for MC10, MC11, and MC12. If you have an earlier version, download and use MC12. These new versions do not require the security key, so they make Micro-Cap free to the entire engineering community.
Thank you for the honor and privilege of serving you for the last 39 years.
Сообщение: 1882
Зарегистрирован: 02.05.07
Откуда: Россия, Смоленск
Рейтинг:
6
Отправлено: 01.11.19 01:26. Заголовок: Увы, так. На самом д..
Увы, так. На самом деле времени прошло намного больше. Я еще в 1992-1993 годах промерял ферриты (разрабатывали аппаратуру для снятия характеристик). А чуть позже сравнивал с результатами моделирования в Micro-Cap. И всё именно так, как написано в статье по ссылке - предельная петля моделируется весьма точно, а вот частные - сильно далеко от действительности - http://microcap-model.narod.ru/ST_01.htm Т.е. несовершенная модель как была в Micro-Cap 7, так и осталась в Micro-Cap 12. Теперь навсегда.
Отправлено: 24.02.20 01:04. Заголовок: Добрый день. Мой МС1..
Добрый день. Мой МС12 после минимизации/максимизации окна не запоминает позиции иконок панелей инструментов. Каждый раз выглядит по-разному, например так:
Пытался привыкнуть, но блин, никак. Выбешивает до белого каления. Не подскажете, решаемо каким-либо образом?
Отправлено: 01.03.20 15:37. Заголовок: На сайте программы у..
На сайте программы убраны все ссылки. Достать версии пока можно по ссылке http://www.spectrum-soft.com/download/download.shtm Осталось на главной странице только - фирма закрыта и по запросу - демо версия. Кому надо, поторопитесь. Сайт фирмы может полностью закрыться.
Отправлено: 05.11.21 23:01. Заголовок: Новая версия MC12.2.0.5
Случайно обнаружил, что на сайте spectrum-soft выложена новая версия MC12.2.0.5 от 17.06.21. Как минимум, в ней появились новые функции AVGR и RMSR, но никаких пояснений к ним я не нашёл. Есть только примеры использования в \Data\Average and RMS\, но пока не всё понятно. Также появились новые примеры в \Data\Three Phase Transformers\, но с ними я ещё не разбирался.
Все даты в формате GMT
3 час. Хитов сегодня: 50
Права: смайлы да, картинки да, шрифты да, голосования нет
аватары да, автозамена ссылок вкл, премодерация вкл, правка нет